The Hampden Model H-CVAT-1A Control Valve and Actuator Trainer provides students with hands-on training for valves, positioners, and actuators found in industry today. Students learn the operation and servicing of globe, ball, and butterfly valves, and both pneumatic and electro-pneumatic positioners and actuators. This trainer is complete with all of the necessary pneumatic and electronic power supplies, connectors, gauges, and regulators necessary to perform experiments utilizing the various valve assemblies.
Copyright 2020 CLICK WebDesigns
The Hampden Model H-PVST-200 Full Scale Industrial Pump and Valve System Trainer is a custom designed unit built to meet the plant specific training needs of the industrial facility. The trainer includes the basic facilities necessary to pump water (or other fluids) in a loop together with the plant specific pump(s), valves and control configurations.
-P Pigging Maintenance Operation
The Hampden Model H-RPT-1 Residential Piping Trainer is designed to demonstrate a series of modern waste flushing systems. The Hampden Model H-RPT-1 Residential Piping Trainer consists of three modern flushing system: Single Flush Flushometer, Dual Flush Flushometer, and Pressure Assist Water Closet.
The Hampden Model H-6645 Series/Parallel Pump Trainer is a tabletop unit for the operation and investigation of series and parallel pump operation. The trainer consists of two centrifugal pumps that are fed by a common water reservoir and a PVC plumbing arrangement, along with five valves that allow various configurations to be implemented.
The Hampden Model H-6981 Centrifugal Pump Test Demonstrator provides a hands-on introduction to the centrifugal pump allowing exploration of pumping mechanics and their effects.
The Hampden Model H-MVOT-1A Motorized Valve Operator Trainer provides students with hands- on training for wiring, adjusting and troubleshooting a two-train motorized valve operator of the type made by Limitorque Corporation. (H-MVOT-2A shown)
The Hampden Model H-6980 Series/Parallel Pump Test Demonstrator provides hands-on experience with the centrifugal pump in both series and parallel configurations. The Model H-6980 is a bench-mounted pumping system permitting students to explore pumping mechanics and its effects. The unit provides two methods of determining flow rate which can be manually adjusted using a throttle valve. One method utilizes an orifice plate and manometer. The other utilizes a vernier hook gauge, a V-notch weir, and equations.
H-6980-CDL Series Parallel Pump Test Demonstrator with Computer Data Logging Option (LabVIEW w/o Software)
H-6980-11 Regenerative Turbine Pump Option
H-6980-12 Gear Pump Option
H-6980-13 Flexable Impeller Pump Option
The Hampden Model H-IMTS-1 Industrial Maintenance Training System provides maintenance technicians with the equipment needed to learn state-of-the-art techniques for maintaining complex drive systems through "hands-on" practice.
H-IMTS-GB Gearbox Maintenance Trainer
H-IMTS-BM Bearing Module Trainer
H-IMTS-BC Industrial Maintenance Training System-Bed Conveyers
H-IMTS-DT DVD Training Package
H-IMTS-CP Courseware Package
H-IMTS-CDL Computer Data Logging Package
H-IMTS-EBM Electric Brake & Clutch Module
H-IMTS-STP Special Tools Package
H-IMTS-TEP Test Equipment Package
H-IMTS-LAK Laser Alignment Kit
H-IMTS-VAK Vibration Analysis Kit
H-IMTS-2S Second Student Package
The Hampden Model H-PPST-1 Piping/ Pipefitters System Trainer provides the student with a "hands-on" trainer for piping. The student will learn the necessary methods of connecting and running metal/iron piping, plastic piping, copper tubing, and hydraulic hose. Each material has its own particular methods used in plumbing.
The Hampden Model H-RIG-1C Rigging Systems Trainer is designed to teach the techniques of safely moving loads of various shapes, sizes and types. The Hampden Rigging System contains a variety of lifting and moving devices to allow the student to learn the proper methods of moving loads safely.
The Hampden Model H-6647 Plunger Pump Trainer provides hands-on introduction to a positive displacement pump. This type of pump is used to move small quantities of liquid at a high pressure. The trainer utilizes a plunger pump which is similar to a piston pump except that the sealing gland is at one end of the cylinder. Data is recorded when this unit is interfaced with the Hampden Model H-6648 Control Interface Module.
The Hampden Model H-6646 Gear Pump Trainer provides a hands-on introduction to the gear pump and its operation. The trainer uses sensors which interface with the Hampden Model H-6648 Control Interface Module sold separately.
P.O. Box 563
East Longmeadow, MA 01028
(Toll Free) 800-253-2133 or 888-HEC-CORP
The Hampden Model H-PST-1 Plumbing Trainer is used to demonstrate an environmentally friendly toilet flushing system. Utilizing gray water, ie. water drained from a sink, the vanity tank will fill and pump the gray water into the water storage tank of a standard toilet. The gray water will be used to flush the toilet instead of using clean water.
The Hampden Model H-PVST-50 Pipe and Valves Assembly Trainer provides the student with a hands on trainer for industrial valves, fittings, and piping. The student will learn the necessary methods of connecting and running metal/iron piping.
The Hampden Model H-PVST-1 Pump and Valve Systems Trainer is a custom designed unit built to meet the plant specific training needs of the industrial facility. The trainer includes the basic facilities necessary to pump water (or other fluids) in a loop, together with the plant specific pump(s), valves and control configurations.
The Hampden Model H-6644 Centrifugal Pump Trainer provides a hands-on introduction to the centrifugal pump and its operation. The trainer uses sensors which interface with the Hampden Model H-6648 Control Interface Module sold separately.
The Hampden Model H-6648b Control Interface Module provides the control and computer data logging components for the Hampden Model H-664 Series table-top trainers.
The Hampden Model H-MTS-3 Mechanical Transfer System is designed to provide students with an understanding of mechanical drives and linkages. This will provide the foundation needed for the study of more advanced machines, such as industrial robots. For example, students will investigate: proportional speed drives; rotary and linear output; intermittent drives; levers; slidercrank; quick return and fourbar mechanisms. (H-MTS-3 shown with options BPS-12P Power Supply and HPT-100A Digital Photo Tachometer)
The Hampden Model H-MZBM-T1C Multi-Zone Building Energy Management Trainer w/ Honeywell Controls, provides a means for training students in the installation, operation, and troubleshooting of a variable air volume unit and a constant volume air handler. The control system allows on-screen menu-prompting displays and operator responses. The controller is used to permit the operator to control every phase of the Energy Management process. Also available are the H-MZBM-J1 with Johnson Controls. Hampden H-LTCS Laptop Computer System is included.