H-6485-10 INSTRUMENTATION AND CALIBRATION CONSOLE 

The Hampden Model H-6485-10 Instrumentation and Calibration Console consists of an instrumentation module and a work center (bench).
Options:
H-ICS-AV Audio Visual Package Option

Copyright 2021  CLICK WebDesigns

HAMPDEN ENGINEERING CORPORATION


​sales@hampden.com

P.O. Box 563

​East Longmeadow, MA 01028

​(Toll Free) 800-253-2133 or 888-HEC-CORP

Local: 413-525-3981

​Fax: 413-525-4741​

H-6510 DRAINAGE AND SEEPAGE TANK DEMONSTRATOR 

The Hampden Model H-6510 Drainage and Seepage Tank Demonstrator has been developed to investigate water flow through permeable media. Using sand as the medium and two-dimensional models, flow lines can be determined as well as the distribution of up-lift pressure and seepage rates.

H-ICS-8189-4 INSTRUMENTATION AND CONTROLS TRAINER WITH FAULTS 

The Hampden Model H-ICS-8189-4 Instrumentation and Controls Trainer with Faults provides experience in setting up, tuning, operating, and troubleshooting actual instrument and control systems of the type used in the power and process industries. By simulating a different process loop, this unit provides instruction in the measuring and transducing of such physical variables as pressure, temperature, flow and level. Students and trainees learn instrumentation and control techniques of standard commercial manufacturers, such as Yokogawa, and Rosemount. Various types of closed-loop control: on/off, proportional, proportional plus integral, and proportional plus integral plus derivative, as well as a variety of final control devices, including electric, pneumatic and electronic are covered.

www.hampden.com/logo

H-6852 MODULAR HEAT EXCHANGER SYSTEM 

The Hampden Model H-6852 Modular Heat Exchanger System has been developed to investigate the fundamental principles of heat transfer devices. The apparatus permits the student to move from classroom theory to hands-on applications with practical training. The student shall measure the variables that affect the overall heat transfer coefficient. The hot and cold fluid temperatures as well as flow rates are monitored at strategic locations. The unit can be configured to operate four different types of heat exchanger modules using quick connect couplers eliminating the use of tools. 
The Model H-6852 Modular Heat Exchanger System consists of the following modules: 
H-6852-A Control Module 
H-6852-B Service Module 
H-6852-G Thermocouple Module Set (4) 
H-6852-H Thermocouple Probe 
H-6852-I Flow Transducer Module set (2) 
H-6852-K Hose Set (various lengths) 
(Model H-6852 Modular Heat Exchanger System shown with optional modules;

H-6852-D, -E, -F, and -J)
Options:
H-6852-C Concentric Tube Heat Exchanger Module Option
H-6852-D Shell-and-Tube Heat Exchanger Module Option
H-6852-E Plate Heat Exchanger Module Option
H-6852-F Jacketed Tank with Stirrer Option
H-6852-J Data Logging I/0 Module (LabVIEW w/o Software)

H-6252 MODULAR CHEMICAL REACTOR SYSTEM 

The Hampden Model H-6252 Modular Chemical Reactor System is used to investigate the chemical reactor which is the most commonly used, important piece of equipment in a chemical plant. Chemical reactors are used to manufacture a wide variety of products including: polyvinyl chloride, epoxy resin, and pharmaceuticals, to name a few. The Hampden Model H-6252 Modular Chemical Reactor System consists of the following Modules: H-6252-A Reagent Service Module (2) H-6252-B Hot Water Service Module (1) H-6252-C Batch Reactor Module (1) H-6252-D Tubular Reactor Module (1) H-6252-E Continuous Stirred Tank Reactor Module (1) H-6252-F Control Module (1) H-6252-H Hose Set (1) H-6252-J Product Tank Module (1)
Options:
H-6252-I Flow Transmitter Module Option (2)
H-6252-G Data Logging I/O Module Option (LabVIEW w/ Software) (1)​

H-6523A SEDIMENT TRANSPORT DEMONSTRATOR 

The Hampden Model H-6523A Sediment Transport Demonstrator investigates suspended sediment in a moving stream and bed load movement. The moving stream can be controlled over a wide range to simulate fast flowing streams or slow moving rivers, demonstrating the various size and density of partial deposits. Slope is adjustable from 0-10%.​

biotechnology

H-6150 LIQUID-TO-LIQUID EXTRACTION DEMONSTRATOR 

The Hampden Model H-6150 Liquid-To-Liquid Extraction Demonstrator has been developed to permit student study of the fundamentals of a liquid-to-liquid extraction system. In addition to demonstrating the hydrodynamics of liquid-to-liquid extraction systems and interface control techniques, this unit can also be used to determine the mass transfer rates, heat transfer coefficients, extraction efficiency, and operating conditions at different liquid flow rates. The extraction process can be operated in a continuous or semi-continuous mode.
Options:
H-6150-CDL Liquid-To-Liquid Extraction Demonstrator with Computer Data Logging Option (LabVIEW w/ Software)​

H-6520 INFILTRATION DEMONSTRATOR

The Hampden Model H-6520 Infiltration Demonstrator investigates the infiltration rates of different soil types and soil surface treatments. This unit consists of a table top base and panel assembly, sump tank tray, three glass cylinders, upper and lower bracket assembly and a graduated beaker. (shown with accessories)

H-ICS-320 ELECTRONIC INSTRUMENTATION MODULES 

The Hampden Model H-ICS-320 Electronic Instrumentation Modules have been developed to provide student experience in the use, calibration and test of electronic instruments.

H-6527 SEDIMENTATION STUDY TRAINER 

The Hampden Model H-6527 Sedimentation Study Trainer has been developed to investigate the physical processes of sedimentation. The student will be able to evaluate and measure the particles as to height, size and settling rates for making up the sedimentation curve.

H-6535 HYDROSTATICS BENCH 

The Hampden Model H-6535 Hydrostatics Bench consists of an assortment of apparatus needed for experiments into the properties of fluids and hydrostatics, including all of the plumbing, pumps and valve control to direct the fluids in the system. Also included is a built-in safety feature that directs fluid into flasks in the case of over-pressurizing the manometers.

H-6526 GROUND WATER FLOW TANK 

The Hampden Model H-6526 Ground Water Flow Tank provides a means of investigating simple three dimensional flow models utilizing sand as a medium. A multitube manometer is used to show profile and make level measurements at appropriate locations.Tank demonstrations provide the student with practical experiments about land drainage, flood risk, wells, and drainage of lakes or ponds.

H-6160 SOLID-TO-LIQUID EXTRACTION DEMONSTRATOR 

The Hampden Model H-6160 Solid-To-Liquid Extraction Demonstrator permits student study of the fundamentals of a solid/liquid extraction system. The student is able to determine the operating characteristics of solvent extraction from a packed bed. The equipment is constructed out of stainless steel and glass for material compatibility. Furthermore, glass parts are used where observation of the process is informative. The corrosion resistant nature of the equipment allows the unit to be used with a wide variety of systems including: water/inorganic salts; water/sugar beets; methylene chloride/vegetable oil; water/coffee and others. All experiments use non-flammable solvents.
Options:
H-6160-CDL Solid-to-Liquid Extraction with Computer Data Logging Option (LabVIEW w/ Software)​

H-ICS-8189-4PH INSTRUMENTATION, CONTROLS & PH CONTROL TRAINER WITH FAULTS 

The Hampden Model H-ICS-8189-4pH Instrumentation, Controls & pH Control Trainer with Faults provides experience in setting up, tuning, operating, and troubleshooting actual instrument and control systems of the type used in the power and process industries. By simulating a different process loop, this unit provides instruction in the measuring and transducing of such physical variables as pressure, flow, level and pH. Students and trainees learn instrumentation and control techniques of standard commercial manufacturers, such as Yokogawa, and Rosemount. Various types of closed-loop control: on/off, proportional, proportional plus integral, and proportional plus integral plus derivative, as well as a variety of final control devices, including electric, pneumatic and electronic are covered.