WB-6A-TMP WORKBENCH WITH TRAILER MOUNTING
The Hampden Model WB-6A-TMP Student Workbench includes convenient storage shelf/footrest and standard 1-3/4" solid maple work surface supported by two steel legs.
HSC-1 MOBILE STORAGE BENCH WITH TRAILER MOUNTING
The HSC-1 Mobile Storage Bench is a roll around bench used to store miscellaneous components and is mounted in the trailer for ease and convienience when traveling.
H-6485-10-TMP INSTRUMENTATION & CALIBRATION BENCH WITH TRAILER MOUNTING
The Hampden Model H-6485-10-TMP Instrumentation and Calibration Console consists of an instrumentation module and a work center (bench).
Copyright 2021 CLICK WebDesigns
H-ETS-1A-TMP ETHANOL TRAINING SYSTEM
The Hampden Model H-ETS-1A-TMP Ethanol Training System is designed to facilitate the instruction of students on the process required to produce ethanol for experimental purposes. Ethanol is a very promising fuel alternative to oil since sources are widely available and ethanol is clean-burning. The student will be able to observe and control the process of producing ethanol from corn, sugar, sorghum, fruits or several other sources. When using this unit along with the Fractional Distillation option, it is possible to produce ethanol with up to 96% purity. (H-ETS-1A-CDL shown)
Options:
Fractional Distillation Unit (Table Top Unit)
Measurement Equipment
Mason Jars (1 case)
BIO-100 BIO DIESEL DEMONSTRATOR
The Hampden Model H-BIO-100 Bio Diesel Demonstrator is ideal for the small producer using the same protocol and with the same quality construction as the larger units. Bio Diesel units are chosen for their rugged design, ease of use, no wash process protocol and price/capacity ratio.
H-6150-TT LIQUID-TO-LIQUID EXTRACTION DEMONSTRATOR - TABLE TOP
The Hampden Model H-6150-TT Liquid-To-Liquid Extraction Demonstrator has been developed to permit student study of the fundamentals of a liquid-to-liquid extraction system. In addition to demonstrating the hydrodynamics of liquid-to-liquid extraction systems and interface control techniques, this unit can also be used to determine the mass transfer rates, heat transfer coefficients, extraction efficiency, and operating conditions at different liquid flow rates.
H-ICS-8189-4-TMP INSTRUMENTATION AND CONTROLS TRAINER WITH FAULTS AND TRAILER MOUNTING
The Hampden Model H-ICS-8189-4-TMP Instrumentation and Controls Trainer provides experience in setting up, tuning, operating, and troubleshooting actual instrument and control systems of the type used in the power and process industries. By simulating a different process loop, this unit provides instruction in the measuring and transducing of such physical variables as pressure, temperature, flow and level. Students and trainees learn instrumentation and control techniques of standard commercial manufacturers, such as Yokogawa, and Rosemount. Various types of closed-loop control: on/off, proportional, proportional plus integral, and proportional plus integral plus derivative, as well as a variety of final control devices, including electric, pneumatic and electronic are covered.
44 FOOT GOOSENECK TRAILER
The Hampden 44 foot Gooseneck Trailer comes complete with air conditioning and electrical power included in the system. Other options are generator system to run air conditioning and electrical power, recharge capability through direct plug of power source. The trailer is used as a mobile training facility and is designed to haul equipment to different training sights.
Options:
Video System Package
Storage Units
Workbenches
bio-process
HAMPDEN ENGINEERING CORPORATION
sales@hampden.com
P.O. Box 563
East Longmeadow, MA 01028
(Toll Free) 800-253-2133 or 888-HEC-CORP
Local: 413-525-3981
Fax: 413-525-4741
H-6252 MODULAR CHEMICAL REACTOR SYSTEM
The Hampden Model H-6252 Modular Chemical Reactor System is used to investigate the chemical reactor which is the most commonly used, important piece of equipment in a chemical plant. Chemical reactors are used to manufacture a wide variety of products including: polyvinyl chloride, epoxy resin, and pharmaceuticals, to name a few. The Hampden Model H-6252 Modular Chemical Reactor System consists of the following Modules: H-6252-A Reagent Service Module (2) H-6252-B Hot Water Service Module (1) H-6252-C Batch Reactor Module (1) H-6252-D Tubular Reactor Module (1) H-6252-E Continuous Stirred Tank Reactor Module (1) H-6252-F Control Module (1) H-6252-H Hose Set (1) H-6252-J Product Tank Module (1)
Options:
H-6252-I Flow Transmitter Module Option (2)
H-6252-G Data Logging I/O Module Option (LabVIEW w/ Software) (1)
H-ICS-X INTERFACE PACKAGE & PROGRAM FOR IBM PC COMPATIBLE SOFTWARE
The Hampden Model H-ICS-X Interface package and program consists of hardware and software necessary to control the Hampden series of ICS panels.
Bio-process and ethanol training
H-ICS-8189-4PH-TMP INSTRUMENTATION, CONTROLS & PH CONTROL TRAINER WITH FAULTS AND TRAILER MOUNTING
The Hampden Model H-ICS-8189-4pH-TMP Instrumentation, Controls & pH Control Trainer provides experience in setting up, tuning, operating, and troubleshooting actual instrument and control systems of the type used in the power and process industries. By simulating a different process loop, this unit provides instruction in the measuring and transducing of such physical variables as pressure, flow, level and pH. Students and trainees learn instrumentation and control techniques of standard commercial manufacturers, such as Yokogawa, and Rosemount. Various types of closed-loop control: on/off, proportional, proportional plus integral, and proportional plus integral plus derivative, as well as a variety of final control devices, including electric, pneumatic and electronic are covered.