Copyright 2021  CLICK WebDesigns

H-CRT-2 COMMERCIAL REFRIGERATION TRAINER (R-134A)

​The Hampden Model H-CRT-2 Commercial Refrigeration Trainer provides students with an introduction to the principal components of commercial refrigeration systems. The instructor is able to insert eighteen electrical faults, such as defective capacitors, motors, and switches for practical electrical troubleshooting as well as two mechanical defective component faults.
Options:
H-CRT-2-CDL (shown) Commercial Refrigeration Trainer with Computer Data Logging & Software Option (R-134a)
H-RST-DMB Digital Manifold with Bluetooth Option

H-RST-10 REFRIGERATION TRAINER (R-134A)    

The Hampden Model H-RST-10 Refrigeration Trainer is a commercial refrigeration component completely plumbed and wired for student operation. This unit consists of refrigeration components rated for a one ton (12000 BTU) system.
Options:
H-RST-DMB Digital Manifold with Bluetooth Option

H-ACTK-1-BMF REFRIGERATION TRAINER - TEV (R-134A)    

The Hampden Model H-ACTK-1-BMF Refrigeration Trainer, using a thermostatic expansion valve as the liquid control device, is factory assembled and charged. The unit contains suction and discharge gauges and four temperature wells for student experimentation. The trainer also consists of evaporator and condenser enclosures with heater and controls.

H-RST-2 REFRIGERANT SYSTEM TRAINER (R-123)     

The Hampden Model H-RST-2 Refrigerant System Trainer was designed to provide students with an actual working model of a refrigeration system, complete in every detail. Its clear glass design allows the student to watch the refergerant change state.
Options:
H-RST-2-CDL (shown) Refrigerant System Trainer with Computer Data Logging & Software Option (R-123)
H-RST-MP (shown) Instrument Package Option
H-RST-FP-10E Electrical Fault Package Option
H-RST-TP Test Points Option (adder for H-RST-FP-10E Option)
H-RST-DMB Digital Manifold with Bluetooth Option

H-CRT-4B COMMERCIAL MULTI-COMPRESSOR RACK REFRIGERATION SYSTEM TRAINER 

The Hampden Model H-CRT-4B Commercial Multi-Compressor Rack Refrigeration System Trainer was designed to provide students with a thorough understanding of the refrigeration cycle, including measurement of pressure, vacuum, flow rate, and temperature. The system components are panel mounted to provide easy access for testing and troubleshooting. The Hampden Model H-CRT-4B is supplied with an integral Fault Package, comprised of preset electrical faults mounted in a locking box on the side of the trainer.
Options:
H-RST-DMB Digital Manifold with Bluetooth Option

H-FRD-1A FUNDAMENTAL REFRIGERATION DEMONSTRATOR (R-134A)   

The Hampden Model H-FRD-1A Fundamental Refrigeration Demonstrator provides students with the opportunity to observe the operation of a domestic refrigerator refrigeration system. It is a complete, ready to-operate refrigeration system. Model H-FRD-a is shown.

H-ACTK-2-BMF REFRIGERATION TRAINER - CAPILLARY TUBE (R-134A)    

The Hampden Model H-ACTK-2-BMF Refrigeration Trainer, using a capillary tube as the liquid control device, is factory assembled and charged. The unit contains suction and discharge gauges and four temperature wells for student experimentation. The trainer also consists of evaporator and condenser enclosures with heater and controls.

H-IRT-1 INDUSTRIAL REFRIGERATION TRAINER (R-134A)   

​The Hampden Model H-IRT-1 Industrial Refrigeration Trainer consists of industrial refrigeration components completely factory assembled and wired. It is designed to provide training with larger commercial and industrial refrigeration systems which require water-cooled condensers (tube-in-tube and shell-in-tube), electric and hot gas defrost systems, cooling towers, hot bypass capacity control systems, crankcase pressure regulators, crankcase heaters and pressure pumps.
Options:
H-IRT-1-CDL Industrial Refrigeration Trainer with Computer Data Logging & Software Option (R-134a)
H-IRT-ACC (shown) Air-Cooled Condenser Accessory
H-IRT-EC (shown) Evaporator Chiller
H-IRT-FP-18E (shown) Electrical Fault Package Option
H-IRT-FP-M Mechanical Fault Package Option
H-ACTK-CT Cooling Tower Accessory
H-RST-DMB Digital Manifold with Bluetooth Option

H-ACT-1 AIR CONDITIONING SYSTEM TRAINER (R-410A)  

​The Hampden Model H-ACT-1 Air Conditioning System Trainer is based on R-410A refrigerant. R-410A is an efficient and environmentally friendly refrigerant. The Model H-ACT-1 is designed to provide the student with a thorough understanding of the systems used in residential and commercial applications. The system components are panel mounted and provide easy access for testing and troubleshooting.
Options:
H-ACT-DMP Digital Meter Package Option
H-ACT-FP-10E Electrical Fault Package Option
H-ACT-TC Digital Temperature Package Option with Thermocouples
H-ACT-1-CDL Computer Data Logging Package
H-RST-DMB Digital Manifold with Bluetooth

262-19X AIR CONDITIONING & REFRIGERATION TEST BENCH   

The Hampden Model 262-19X provides a convenient work surface, storage facilities, and the most often used auxiliary and test equipment for the refrigeration and air conditioning shop. The bench and panel are constructed of code gauge steel.

H-ACD-2A RECIRCULATING AIR CONDITIONING TRAINER (R-134A)

​The Hampden Model H-ACD-2A Recirculating Air Conditioning Trainer is designed to demonstrate the principles of air conditioning.
Options:
H-ACD-2A-CDL (shown) Recirculating Air Conditioning Trainer with Computer Data Logging & Software Option (R-134a)
H-RST-DMB Digital Manifold with Bluetooth Option

H-PRD-1 POTENTIAL RELAY DEMONSTRATOR  

The Hampden Model H-PRD-1 demonstrates the function of a potential relay in the starting of a 240V compressor. A potentiometer is used to simulate the increasing speed of the motor during start-up. Pilot lights indicate when the start and run windings and the start and run capacitors are energized. Lamp brightness varies during the start period to simulate voltage variation. Four test jacks permit realistic voltage measurements at the potential relay. Input power is single-phase AC through a GFI circuit breaker.

262-19 AIR CONDITIONING TEST BENCH WITH OVEN    

The Hampden Model 262-19 is a work bench with a maple top and permanently mounted control console designed to accommodate a variety of test and repair activities, including checking out and charging an air conditioning or refrigeration unit. Its facilities include power sources, instruments and mechanical equipment, plus generous storage space below the work space. The test bench also features an optional full capacity built-in drying oven with automatic timer.

H-CPT-1A SINGLE-PHASE COMPRESSOR TRAINER   

The Hampden Model H-CPT-1A Single-Phase Compressor Trainer provides students with the opportunity to connect a single-phase compressor in various wiring configurations and varying suction and discharge pressures to produce realistic operating conditions.

H-RST-9 REVERSE CYCLE REFRIGERATION TRAINER (R-134A)    

The Hampden Model H-RST-9 Reverse Cycle Refrigeration Trainer provides students with a hands-on training introduction to the principal components of refrigeration, both primary and reverse cycle applications.
Options:
H-RST-9-CDL Reverse Cycle Refrigeration Trainer with Computer Data Logging & Software Option (R-134a)
H-RST-9-DMP Digital Meter Package Option
H-RST-DMB Digital Manifold with Bluetooth Option

H-CRT-3 ADVANCED COMMERCIAL REFRIGERATION TRAINER (R-134A)    

The Hampden Model H-CRT-3 Advanced Commercial Refrigeration Trainer provides students with a hands-on introduction to the principal components of a small scale cold room.
Options:
H-CRT-3-TK Tool Kit Option
H-CRT-3-TS Test & Service Package Option
H-CRT-3-MPP Maintenance & Practice Package Option
H-RST-DMB Digital Manifold with Bluetooth Option

H-RST-21A MINI SPLIT-TYPE HEAT PUMP TRAINER   

The Hampden Model H-RST-21A Mini Split-Type Heat Pump Trainer provides a hands-on introduction to the principle components of heating and air conditioning. This system places the indoor unit (evaporator) remotely from the outdoor unit (condenser) providing a quiet, no air flow restriction, and secure system.

H-ACTK-CT COOLING TOWER 

The Hampden Model H-ACTK-CT Cooling Tower provides a hands-on introduction to the principal components of cooling towers. The unit provides the student with the ability to assemble and troubleshoot the systems.

hvac

A/C & Refrigeration

www.hampden.com/logo

H-RST-3B BASIC REFRIGERATION TRAINER (R-134A)     

The Hampden Model H-RST-3B Basic Refrigeration Trainer was designed to provide students with a thorough understanding of the refrigeration cycle, including measurement of pressure, vacuum, flow rate, and temperature.
Options:
H-RST-3B-CDL Basic Refrigeration Trainer with Computer Data Logging & Software Option (R-134a) (includes H-RST-TC)
H-RST-MP (shown) Instrument Package Option
H-RST-FP-10E Fault Package Option - Electrical
H-RST-FP-M Fault Package Option - Mechanical
H-RST-TC Digital Temperature Module Option with thermocouples (H-RST-3B only)
H-RST-DMB Digital Manifold with Bluetooth Option

H-ACTK-CTA-BMF REFRIGERATION TRAINER WITH FAULTS (R-134A)    

The Hampden Model H-ACTK-CTA-BMF Refrigeration Trainer is factory assembled, except for the liquid control device. A thermostatic expansion valve, a capillary tube and an automatic expansion valve are supplied. The student installs the liquid control device and charges the system. Suction and discharge gauges and four temperature wells are supplied for student experimentation. The trainer also includes switches for inserting six electrical faults and controls for the heater in the evaporator enclosure.

H-CFS-1C COMPRESSOR FAULT SIMULATOR  

The Hampden Model H-CFS-1C Compressor Fault Simulator is designed to give students experience with troubleshooting hermetic compressors. Up to 16 faults may be inserted into the compressor, the current relay, the capacitors, the overload relay, or the power wiring.

H-IMD-1A ICE MACHINE DEMONSTRATOR  

The Hampden Model H-IMD-1A Ice Machine Demonstrator demonstrates the principles, mechanics, and maintenance aspects of commercial ice machine systems.

HAMPDEN ENGINEERING CORPORATION


​sales@hampden.com

P.O. Box 563

​East Longmeadow, MA 01028

​(Toll Free) 800-253-2133 or 888-HEC-CORP

Local: 413-525-3981

​Fax: 413-525-4741​

H-DSCT-1A DUAL SPEED COMPRESSOR TRAINER 

The Hampden Model H-DSCT-1A facilitates the study and troubleshooting of the electrical and control circuits of a three-phase, dual-speed hermetic compressor. Standard commercial components are wired into an operating electrical control system, while the compressor is simulated with pilot lights and sound. Up to 16 malfunctions may be inserted via the fault switches mounted on the rear of the trainer.

H-RST-6 BASIC REFRIGERATION TRAINER (R-134A)    

The Hampden Model H-RST-6 Basic Refrigeration Trainer provides students with an introduction to the principal components of basic refrigeration systems. The instructor is able to insert ten electrical faults, including: defective motors, switches, and relays for electrical troubleshooting, as well as three mechanical faults.
Options:
H-RST-6-CDL (shown) Basic Refrigeration Trainer with Computer Data Logging & Software Option (R-134a)
H-RST-DMB Digital Manifold with Bluetooth Option

H-CRT-1 COMMERCIAL REFRIGERATION TRAINER (R-134A)

The Hampden Model H-CRT-1 Commercial Refrigeration Trainer contains two evaporators, which may be operated singly or in parallel. Three types of liquid control devices are included: capillary tube, thermostatic expansion valve, and an automatic expansion valve. Sight glasses at the inlet and outlet of the evaporators and condenser allow students to monitor the changes in refrigerant state.
Options:
H-CRT-1-CDL Commercial Refrigeration Trainer with Computer Data Logging & Software Option
H-RST-DMP (shown) Digital Meter Package Option
H-CRT-FP-18E Fault Package Option - Electrical
H-CRT-FP-M (shown) Fault Package Option - Mechanical
H-CRT-TC Digital Temperature Package Option
H-CRT-1-VC Variable Compressor Option
H-CRT-1-CDL-LT Commercial Refrigeration Trainer with Computer Data Logging Sensors only
H-RST-DMB Digital Manifold with Bluetooth Option

H-TPCT-1A THREE-PHASE COMPRESSOR TRAINER   

​The Hampden Model H-TPCT-1A Three-Phase Compressor Trainer provides students with the ability to operate, test, and troubleshoot the electrical controls of a three-phase commercial single-package air conditioner.

H-CRT-8 COMMERCIAL WALK IN FREEZER TRAINER 

The Hampden Model H-CRT-8 Commercial Walk In Freezer Trainer provides students with a hands-on introduction to the principal components of a cold room. This advanced system incorporates nine instructor-controlled programmed switchable faults inside a lockable compartment. Unit is mounted onto mobile base with 10 castors.

HEE-11R BASIC ELECTRICITY RELAY TRAINER    

The Hampden Model HEE-11R Basic Electricity Relay Trainer facilitates the study and troubleshooting of the control components and circuits used in refrigeration and air conditioning systems.

H-ACD-1A AIR CONDITIONING DEMONSTRATOR (R-134A) 

​The Hampden Model H-ACD-1A Air Conditioning Demonstrator has been designed to teach the principles of thermo-dynamics as related to the field of air conditioning and refrigeration.
Options:
H-ACD-1A-CDL Air Conditioning Demonstrator with Computer Data Logging & Software Option (R-134a)
H-RST-DMB Digital Manifold with Bluetooth Option

H-RST-5 REFRIGERATION AND A/C TRAINER (R-134A)     

The Hampden Model H-RST-5 Refrigeration and Air Conditioning Trainer is a thermostatic expansion valve (TEV) controlled refrigerating system which provides the basic facilities for studying the principles, mechanics and maintenance aspects of industrial refrigeration systems.
Options:
H-RST-5-CDL Refrigeration and A/C Trainer with Computer Data Logging & Software Option (R-134a)
H-RST-DMB Digital Manifold with Bluetooth Option

H-RST-11 RED DOT AIR CONDITIONER TRAINER (R-134A)

The Hampden Model H-RST-11 Red Dot Air Conditioner Trainer Provides a hands-on introduction to the principal components of a Red Dot Brand air conditioning system. This trainer utilizes the air conditioning system incorporated in a HMMWV military vehicle.
Options:
H-RST-DMB Digital Manifold with Bluetooth Option